RCA DRC6331 Bedienungsanleitung (4 Seiten) (2024)

Locating a speci c chapter / title

If you know the chapter/title number for the chapter that you want to play, you can locate it by directly selecting

that number.

1. Press the GOTO button.

2. Press the / button to highlight chapter/title number, press the corresponding number buttons (2

digits) for the chapter/title you want (For example: 02, 08, 10 or 15). If you press only 1 numeric button,

press the button to conENTER rm.

3. Playback starts from the selected chapter/title.

Notes:

• If the chapter/title number entered is not permitted by the DVD, " Input invalidInput invalid" will display. Repeat steps

1 and 2 to re-enter the correct number.

• Some discs may not respond to this process.

• This method of locating a chapter/title is available only on a DVD that contains chapter/title numbers.

Locating a speci c time

You can move to a speci c location by entering its corresponding time (hours, minutes, seconds).

1. Press the GOTO button two times.

2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1 08 23, 1 22 56) for the

setting point you want.

3. Playback starts from the selected section.

Notes:

• If the time entered is not permitted by the DVD, " Input invalidInput invalid " will display. You should re-enter the correct

time.

• Some discs may not respond to this process.

• Some scenes may not be located as precisely as you speci ed.

• This method for accessing speci c locations is available only within the current title of the DVD.

Locating a speci c disc / track time

You can move to a speci c location by entering disc/track time (minutes, seconds).

1. Press the GOTO button until the below bar appears.

2. Press the corresponding number buttons (4 digits: XX:XX, for example: 30 05, 02 23) for the setting point

you want.

3. Playback starts from the selected section.

Notes:

• If the time entered is not permitted by the CD, " Input invalidInput invalid" will display. You should re-enter the correct

time.

• Some scenes may not be located as precisely as you speci ed.

Selecting a speci c track

1. Press the GOTO button 3 times.

2. Press the corresponding number buttons (2 digits) for the track you want (For example: 02, 08, 10 or 15). If

you press only 1 numeric button, press the ENTER button to con rm.

3. Playback starts from the selected track.

Notes:

• If the track number entered is not permitted by the CD, " Input invalidInput invalid" will display. Repeat steps 1 and 2

to re-enter the correct number.

• You can also directly press the number buttons to select a track.

Subtitle selection

1. While a DVD is playing, press the SUBTITLE

button to display the current language setting,

as shown in the example.

2. Press the SUBTITLE button repeatedly to select

the desi red subtitle language. You can turn

subtitles off by pressing the button SUBTITLE

repeatedly until the “ Subtitle OffSubtitle Off

” is displayed.

Notes:

• S o m e DV Ds ar e se t t o di s p l a y su b t i t l e s

automatically, and you cannot turn them off

even if you set the subtitle function to o .

• Duri ng some scenes, the subti tles may not

appear immediately after you select your desired

scene.

• The number of subtitle languages recorded

di f f e rs de pen di ng o n the dis c. If onl y one

language is recorded, the language does not

change.

• This f unction can only be used for discs on

which subtitles have been recorded in multiple

languages.

• Some DVDs allow you to change subtitles using

the disc menu only. If this is the case, press

the MENU button and choose the appropriate

subtitle on the disc menu.

Skip forward / reverse

• Press the NEXT button to advance chapters/

tracks.

• Press the PREV button to go back to current

or previous chapters/tracks.

• For an Audio CD, use the number buttons on the

remote control to jump directly to the desired

track number.

Audio selection

On some DVDs, the sound is recorded in two or more

formats. Follow the directions below to select the

preferred language and sound system.

1. While a disc is playing, press the AUDIO button

to show the current audio format number.

2. Press the AUDIO button repeatedly to select the

desired audio format.

Notes:

• If only one audio format is recorded on the DVD,

the number does not change.

• Some DVDs allow you to change audio selections

using the disc menu only. If this is the case, press

the MENU button and choose the appropriate

language on the disc menu.

• You can select different audio channels (Stereo,

Mono Left, Mono Right or Mi x-Mono) on an

Au d i o C D by pr e s si ng the A U D I O bu tt o n

repeatedly.

Stopping playback

Press the STOP button at the location where you

want to interrupt playback. To resume playback at

the position where the disc was stopped, press the

PLAY button.

If you press the STOP button twice, the unit’s

memory will be cleared and pressing the PLAY

button will reset the DVD to the beginning.

Fast forward / Fast reverse

1. Press the SEARCH or button SEARCH

when a disc is playing. Each time you press the

SEARCH or button, the playback SEARCH

speed changes in the following sequence:

2. Press the PLAY button when you reach the

desired point to resume normal playback.

Notes:

• The DVD player mutes sound and subtitles

during reverse and forward scan of DVDs.

• The fast playback speed may differ depending

on the disc.

Printed in China 811-633191W021

Symptom Cause (and remedy)

• Ensure the AC power adapter is connected.

• The unit is not turned on.

• Make sure the infrared remote sensor is not blocked.

• Make sure the plastic sheet has been removed from the remote control.

• Point the remote directly at the infrared remote sensor on the unit.

• Replace the battery in the remote control with a new one.

• Make sure DVD mode is selected.

• The system is in pause mode. Press the PLAY button to return to normal play mode.

• The unit is in fast-forward or fast-reverse mode. Press the PLAY button to return to

normal play mode.

• Make sure the AUDIO/VIDEO output connections are correct.

• The DTS DVD cannot be decoded to have speaker output.

• The unit is too hot; shut o the unit for 30 minutes to cool it down.

• The region number of the disc doesn't match the region number of this unit.

• Clean the disc.

• The disc is scratched.

• Adjust the LCD's brightness and contrast using the VIDEO MODE button on the remote

control.

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

• Clean the disc.

• There is no disc inside (“No Disc” appears on the screen).

• Insert the disc correctly with the playback side facing down.

• Clean the disc.

• A non-NTSC disc has been inserted. The unit and disc region number are incompatible.

• Condensation may have formed inside the unit due to a sudden change in temperature.

Wait about an hour for it to clear and try again.

No power.

The remote

control does not

function.

No sound or only

a very low-level

sound is heard.

No picture.

The picture is not

clear.

Severe hum or

noise is heard.

The disc does not

play.

System setup

1. Press the SETUP button in stop mode.

2. Press the / button to select System Page.

3. Press the / button to select the option (TV Display or

Default), then press the button.

4. Press the / button to adjust the settings, then press the

ENTER button to con rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the SETUP or RETURN button to exit the menu.

Default

It takes 3-5 seconds to reset the DVD settings to the factory default.

TV Display

Pan Scan

• When wide-screen video is played, this mode clips the right and left sides of the

image so that it can be viewed on a conventional screen.

• Some wide-screen DVDs that do not permit Pan Scan mode playback are

automatically played in letterbox mode (black bands that appear at the top and

bottom of the screen).

Letter Box

• When wide-screen video is played in this mode on a conventional screen, black

bands appear at the top and bottom of the screen.

Wide Screen

• This is the correct mode for playing wide-screen videos on the unit screen or

other external wide-screens.

Notes:

• The displayable picture size is preset on the DVD. Therefore the playback picture

of some DVDs may not conform to the picture size selected.

• When you play DVDs recorded in the 4:3 aspect ratio, the playback picture will

always appear in the 4:3 aspect ratio regardless of the TV display setting.

• Select Wide Screen to conform the LCD screen on the unit. Always be sure that

your TV display conforms to the actual TV in use if you connect the unit to a TV.

Wide Screen

Letter Box

Cut off when a wide-screen

video image is played.

Pan Scan

Tv Display

Default

Wide

No

Go To Syst em Page

- - Syste m Page - -

Syst emLanguage Video

You can play a specific title or chapter repeatedly.

(Title repeat, chapter repeat, A-B repeat)

Repeating a chapter

1. While the DVD is playing, press the REPEAT DISC

button until the “ ChapterChapter ” indicator displays

on the screen. The current chapter is played

repeatedly.

Repeating a title

2. While the DVD is playing, press the REPEAT DISC

button until the “ TitleTitle ” indicator displays on

the screen. The current title is played repeatedly.

To resume normal playback

3. While the DVD is playing, press the REPEAT DISC

button until the “

Repeat OffRepeat Off

” indicator displays

on the screen.

You can play a single track or the whole disc repeatedly.

Repeating a single track

1. While the CD is playing, press the REPEAT DISC

button until the “ ” indicator displays on

the screen. The current track is played repeatedly.

Repeating the whole disc

2. While the CD is playing, press the REPEAT DISC

button until the “ ” indicator displays on

the screen. The whole disc is played repeatedly.

To resume normal playback

3. While the CD is playing, press the REPEAT DISC

button until the repeat indicator disappears from

the screen.

Title 01/03 Chapter 03/12Title 01/03 Chapter 03/12

Title 01/03 Chapter 00/00Title 01/03 Chapter 00/00

Title 01/03 T imeTitle 01/03 T ime : :

3. Pre ss th e PLAY button to start mem ory

playback (“ ProgramProgram ” appears on the screen).

4. To resu me no rmal playback f ro m m e mo ry

playback

1). Press the MEMORY button to display the

memory menu.

2). Use the Cursor buttons ( , , , ) to move

the highlighted bar to “Stop”. Press the ENTER

button to con rm “Stop”.

3). Press the ENTER button to confirm “Exit”. It

will return to normal playback (“ ProgramProgram ”

disappear from the screen).

Notes:

• For a CD, you can only arrange order for tracks.

The display will be a little di erent.

• If the title or chapter number entered is not

permitted by the DVD, it will disappear. You

should re-enter correct number.

• You should input items one by one following the

1, 2, 3 ... sequence.

• If the DVD contains only one title, you can only

arrange order for chapters.

• Some discs may not permit memory playback

operation.

• If you select repeat during memory playback,

the DVD player repeats the current memor y

playback.

• If you press the MEMORY button whi le the

display appears on the TV screen, the display

disappears.

• The programmed selections will be cleared when

you press the STOP button two times, open

the disc tray or turn o the DVD player.

Language setup

1. Press the SETUP button in stop mode.

2. Press the button to select Language Setup Page.

3. Press the / button to select the option (OSD Language,

Audio, Subtitle or Disc Menu), then press the button.

4. Press the / button to select your preferred language,

then press the button to conENTER rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the SETUP or RETURN button to exit the menu.

Notes:

• Some DVDs may not play in the audio language you selected. A prior language may be programmed on

the disc.

• Some DVDs may be set to display subtitles in a language other than the one you selected. A prior subtitle

language may be programmed on the disc.

• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case, press the

MENU button and choose the appropriate subtitle language from the selection on the disc menu.

• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically displays

disc menus consistent with the disc's initial language setting.

Video setup

1. Press the SETUP button in stop mode.

2. Press the / button to select Video Setup Page.

3. Press the / button to select the option (Brightness or

Contrast), then press the button.

4. Press the / button to adjust the setting, then press the

ENTER button to con rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the SETUP or RETURN button to exit the menu.

You can combine your favorite titles/chapters/tracks

and play them in the order you determine.

1. Pres s th e ME MORY b ut to n whi le a di sc i s

playing. The following display appears.

2. Input the title (2 digits) and chapter (2 digits) by

pressing the number buttons (For example: 01

02, 02 05, 02 11). It will move to the next item

automatically.

• You can use the Cursor buttons ( , , , ) to

move the highlighted bar to any item, and re-

enter the title and chapter. Press the NEXT

/ PREV to move to the the next / previous

setup page.

• You can use the Cursor buttons ( , , , ) to

move the highlighted bar to “Clear”, “Exit”, “Start”

or “Next / Prev”, and press the ENTER button to

con rm.

Clear: Delete all input programs.

Exit: Exit memory menu and return to normal

playback.

Start: Start memory playback.

Next / Prev: Move to the the next / previous setup

page.

Go To Language Setup Page

- - Language Set up Page - -

SystemLanguage Video

OSD Language

Audio

Subtitle

Disc Menu

Eng

Eng

Of f

Eng

Brightness

Contrast

Go To Video Setup Page

- - Video Set up Page - -

Language

00

00

SystemVideo

Adjust the LCD screen

You can adjust Brightness, Panel Display and Contrast of the LCD screen.

1. Press the VIDEO MODE button.

2. Press the / button to select Brightness, Panel Display or Contrast.

3. Press the / button to change the setting.

4. Press the VIDEO MODE button to exit the menu.

This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in

a manner that allows speci c or limited operation during playback. Therefore, this unit may not respond

to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the

speci c DVD in question for more information about the options available on that DVD.

“ ” may appear on the screen during operation. A “ ” means the desired operation is not permitted

by the unit or disc.

Playing a disc

1. Slide the CHARGE / STANDBY / ON switch on

the left side of the unit to the ON position.

See Customizing the function settings before

proceeding to step 2.

2. Press the PUSH OPEN fovea on the disc door to

open the disc door.

3. Hold the disc by its sides and carefully place it

onto the spindle with the label side facing up,

pushing gently until you hear a “click”.

4. Press the PUSH OPEN fovea to close the disc

door. It takes a short while for your unit to load

the disc. After loading, the unit will automatically

bring you to the main menu of the DVD or start

playing the DVD.

5. If the unit does not automatically start playing

the DVD, press the PLAY button.

Pausing playback (still mode)

Press the PAU S E button. To resume normal

playback, press the PLAY button.

For a DVD, each time you press the PAUSE button,

the picture advances one frame.

1. While you are playing a DVD with di erent angles recorded,

press the ANGLE button to view the number of current

angles available.

2. Press the ANGLE button repeatedly to change the scene to

the next recorded angle.

• After approx. two seconds, playback will continue from

the new angle selected.

• If no button is pressed within 10 seconds, playback

continues without changing the current angle.

Sequence of angle shots (Example)

Audio 1/3:Dolby D 2ch EnglishAudio 1/3:Dolby D 2ch English

Subtitle 02/03:SpanishSubtitle 02/03:Spanish

2x 4x 8x 16x2x 4x 8x 16x

2x 4x 8x 16x2x 4x 8x 16x

1/31/311

/31/32/33

Display function

While the disc is playing, press the DISPLAY button repeatedly to display information on operation status.

Playing a disc (basic playback)

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can

reproduce from one to 5.1 discrete channels of excellent quality audio.

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-

channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel

soundtracks available on many DVDs.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Sound system Troubleshooting guide

Maintenance

Repeat playback

Repeating a speci c section

You can play a speci c section repeatedly.

1. While the disc is playing, press the REPEAT A-B

button at the beginning of the section (“ AA ”

is displayed) you want to play repeatedly.

2. Press the REPEAT A-B button again at the end of

the section (“ ABAB ” is displayed).

3. The unit will immediately begin replaying your

selection.

To resume normal playback

4. While the disc is playing, press the REPEAT A-B

button until the “ AB OFFAB OFF ” indicator displays

on the screen (the repeat indicator disappears

from the screen for a CD).

Notes:

• Some discs may not permit A-B repeat operation.

• You cannot set the A-B repeat function for a

segment that includes multiple camera angles.

• You can speci fy a se gment o nly withi n the

current title or track.

• There may be a slight difference between point

A and the location where playback actually

resumes depending on the disc.

Angle selection

Some DVDs contain scenes that have been shot from a number of di erent angles. For these discs, the same

scene can be viewed from each of these di erent angles.

Note: This function can only be used for discs on which scenes shot from multiple angles have been recorded.

Locating a desired section

Customizing the function settings

Programmable memory Viewing JPEG  les

This unit can play JPEG  les recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).